We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are […]
Los Alamos BEAM Workshop
Dave Hrynkiw
March 19, 2001
We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! It's questionable if the workshop will be resurrected next year, so if you are at all interested in coming out to this great BEAM event, this is most likely your last chance!
This year's event will again be at the Santa Fe Art Institute, in the 4300 square foot indoor studio. This is adjacent to a splendid outdoor courtyard with a large fountain (ideal for testing aquatics...). Santa Fe, New Mexico is a beautiful area, with lots of sunshine and splendid tourist attractions. That bit is for you to convince Mom/Dad/Wife/Husband that there'll be something to do for the non-robogeeks in the family.
We're told that the Santa Fe Art Institute is taking care of registrations, so you may want to contact them at (505) 424-5050 for details. We'll try to get updates as soon as possible.
MORE POSTS
Still time to get stuff for Christmas...
There's still a bit of time left if you're dropping hints to your loved ones about what you want for Christmas! US Express -- December 22 (last chance!) Canada Express -- December 23
Solarbotics Holiday Hours
Well, it's that time of the season to shut down and spend time with the family. Solarbotics will be closing December 21, 2001 at 4pm, and we'll reopen January 3, 2002.
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.