Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]
Los Alamos BEAM Workshop
Dave Hrynkiw
March 19, 2001
We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! It's questionable if the workshop will be resurrected next year, so if you are at all interested in coming out to this great BEAM event, this is most likely your last chance!
This year's event will again be at the Santa Fe Art Institute, in the 4300 square foot indoor studio. This is adjacent to a splendid outdoor courtyard with a large fountain (ideal for testing aquatics...). Santa Fe, New Mexico is a beautiful area, with lots of sunshine and splendid tourist attractions. That bit is for you to convince Mom/Dad/Wife/Husband that there'll be something to do for the non-robogeeks in the family.
We're told that the Santa Fe Art Institute is taking care of registrations, so you may want to contact them at (505) 424-5050 for details. We'll try to get updates as soon as possible.
MORE POSTS
Sandwich PCB Parts Bundle!
We are finally stocking the complete parts bundle (with PCB) to compliment David Cook's Robot Building for Beginners book. Check out our kits section, and take a look at the Sandwich parts bundle which contains everything, including a nice set of documentation, to build your very own Sandwich bot.
More New Gear Motors
Here they come: The GM11a, GM12a, GM13a, GM14a, and the GM18. These motors are very similar to the GM11/12/13/14 series you know and love, but for less money!
Solarbotics and Art Hack II at Alberta C...
Solarbotics has supplied some tech bits and pieces for the recent ART HACK II, an intensive artistic boot camp led by Visiting Artist, Raul Nieves (Blablablab, Practipo Barcelona), where students were building open source the 3D printers.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.