We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! […]
Looking for something special to do this...
Dave Hrynkiw
June 9, 2006
We thought what better to do then build a robot? So we have picked three of our kits that you can build with Dad (or a Son/Daughter). And, not only can you assemble these kits in an afternoon, they will look great showing them off at work on Monday!
Never built a robot before? No problem, our robots come with top-notch components and documentation, and are developed from years of teaching robotics workshops. So, if you have never soldered before you can build our SunSwinger Pendulum. If you want to learn a bit more about robotics try our BEAM powered PhotoPopper Photovore. And if you want the real challenge, plus a robot that knows no bounds, try our xenomorphic Turbot Tumbling Robot.
If you mention "Father's Day Promo" when you are ordering, we'll knock off another 15% from any of these three kits!
MORE POSTS
Rick and Morty Portal Gun
Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]
Closed Monday, February 21st
We all have family, in one form or another. Parents, siblings, aunts, uncles, cousins, grandparents, friends, pets... In some cases, even a delapitated, 20 year-old Honda Civic lovingly referred to as Lou. It has rust in the rear quarter panels and the steering wheel squeeks when it gets cold, but things just wouldn't be the […]
New Product and Day Off
It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday. LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.