Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
Looking for something special to do this...
Dave Hrynkiw
June 9, 2006
We thought what better to do then build a robot? So we have picked three of our kits that you can build with Dad (or a Son/Daughter). And, not only can you assemble these kits in an afternoon, they will look great showing them off at work on Monday!
Never built a robot before? No problem, our robots come with top-notch components and documentation, and are developed from years of teaching robotics workshops. So, if you have never soldered before you can build our SunSwinger Pendulum. If you want to learn a bit more about robotics try our BEAM powered PhotoPopper Photovore. And if you want the real challenge, plus a robot that knows no bounds, try our xenomorphic Turbot Tumbling Robot.
If you mention "Father's Day Promo" when you are ordering, we'll knock off another 15% from any of these three kits!
MORE POSTS
Closed March 29
Ok, so tomorrow is apparently not a regular Friday, but a good one. I would say, that is a very honest thing to call it, because what else would you call a Friday that is a day off? Sure, it's good. So that's what we are doing on that day - being closed and away, […]
StrongBad victorious again!
Our trip to RoboMaxx was great fun, and StrongBad did it again, winning first place in the Advanced Mini-Sumo competition! The GM6 gear motors did their job, rarely failing to give StrongBad the ability to power opponents out of the ring. We also entered our Sumovore Sumo robot kit (officially available in a day or […]
Lulzbot 3D Printer Documentation and Res...
Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.