LMR Start Here Kit, Beetlebot Preorders

Dave Hrynkiw
May 29, 2010

Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome stuff. Like what, you ask?

LMR Start Here KitIf none of you have ever checked out Let'sMakeRobots.com, you're missing out. This is a fabulous community of robot builders - there are always plenty of neat ideas being worked on, totally worth investigating. Like, for example, the Start Here project. This is great for anyone seeking to make one of their first robots with a degree of complexity. Frits has done a fantastic job of laying out the steps, complete with photos and descriptions.  We're proud to announce a partnership with LMR where you can purchase all the parts to build this kit right here, and we'll donate 10% of the proceeds directly to LMR for maintaining their site and building the community.

BeetlebotIn other news, we are, finally, so very close to releasing the long awaited BeetleBot.  It made its debut at the Maker Faire, and now we're just putting our finalizing touches on it for a full release. We're so close, in fact, that we're accepting pre-orders. Follow the above link (or click on the image) to go to the product page. Don't forget to choose your theme - there are four colours for each of the good and evil versions, so choose wisely! If all goes well, we hope to be shipping these orders out during the coming week.

MORE POSTS

February 5, 2010
Temperature Sensors, New Instructable

Woo, we've had a busy week! To start things off, we have a new category - Temperature Sensors! So far it has the following items: Humidity/Temperature Sensor DS1620+ Serial Digital Thermometer DS18B20+ Temperature Sensor Devantech TPA81 8x1 Thermopile LilyPad Temperature Sensor Yeah, it's a pretty bare category at the moment, but we'll be adding to […]

July 12, 2007
BEP Application: Wilf Rigter Solar Power...

The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.

August 4, 2005
Farewell, Mr. McKee!

After 5 years of employment with Solarbotics Ltd., Grant McKee has submitted his letter of resignation to Solarbotics, effective August 16th 2005. Mr. McKee has been an invaluable resource at Solarbotics, but is off to hunker down and gather resources before making the leap to further advance his education. Although he will be greatly missed, […]

October 16, 2001
New Calgary Robot Club

This Thursday (October 18) is the inaugural meeting of the Western Canadian Robot Society, Room MD213 7PM at the Southern Alberta Institute of Technology (SAIT). We're hoping to revive the interest in the local robot scene, as Calgary already has one of the biggest robot games in the world, and it's a killer center of […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart