Another msg from our Italian contacts: Sumovores do well at the Pisa! Here's a Google-translated link.
Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome stuff. Like what, you ask?
If none of you have ever checked out Let'sMakeRobots.com, you're missing out. This is a fabulous community of robot builders - there are always plenty of neat ideas being worked on, totally worth investigating. Like, for example, the Start Here project. This is great for anyone seeking to make one of their first robots with a degree of complexity. Frits has done a fantastic job of laying out the steps, complete with photos and descriptions. We're proud to announce a partnership with LMR where you can purchase all the parts to build this kit right here, and we'll donate 10% of the proceeds directly to LMR for maintaining their site and building the community.
In other news, we are, finally, so very close to releasing the long awaited BeetleBot. It made its debut at the Maker Faire, and now we're just putting our finalizing touches on it for a full release. We're so close, in fact, that we're accepting pre-orders. Follow the above link (or click on the image) to go to the product page. Don't forget to choose your theme - there are four colours for each of the good and evil versions, so choose wisely! If all goes well, we hope to be shipping these orders out during the coming week.
Another msg from our Italian contacts: Sumovores do well at the Pisa! Here's a Google-translated link.
Hey everyone, while parts of Calgary are still in recovery, things are now back to normal on our end. We're processing and shipping out on schedule, and unless you're in a flood-affected area you'll be receiving your order on time. Thanks for your patience!
Finally got them through the Pick and Place machine, tested, and ready to go. Check out the blue and green versions! (We're still kicking around a VU-type Greeeeen/Yel/RED version too. What do you think?) By the way, we've got some pretty decent sample code on how to use your Ardweeny Backpack (and thusly, any Arduino-compatible) […]
Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop). Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.