LMR Start Here Kit, Beetlebot Preorders

Dave Hrynkiw
May 29, 2010

Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome stuff. Like what, you ask?

LMR Start Here KitIf none of you have ever checked out Let'sMakeRobots.com, you're missing out. This is a fabulous community of robot builders - there are always plenty of neat ideas being worked on, totally worth investigating. Like, for example, the Start Here project. This is great for anyone seeking to make one of their first robots with a degree of complexity. Frits has done a fantastic job of laying out the steps, complete with photos and descriptions.  We're proud to announce a partnership with LMR where you can purchase all the parts to build this kit right here, and we'll donate 10% of the proceeds directly to LMR for maintaining their site and building the community.

BeetlebotIn other news, we are, finally, so very close to releasing the long awaited BeetleBot.  It made its debut at the Maker Faire, and now we're just putting our finalizing touches on it for a full release. We're so close, in fact, that we're accepting pre-orders. Follow the above link (or click on the image) to go to the product page. Don't forget to choose your theme - there are four colours for each of the good and evil versions, so choose wisely! If all goes well, we hope to be shipping these orders out during the coming week.

MORE POSTS

December 5, 2014
Friday New Product: Brackets and Push Bu...

Another  Friday has arrived, and with it we have some new mounting hardware and buttons to look at: Pololu Mini Plastic Gearmotor bracket Pair - Wide $3.25 Affix our GM6 and GM7 motors to any project with these plastic motor brackets. Pololu Mini Plastic Gearmotor bracket Pair - Tall $3.25 Affix our GM6 and GM7 […]

July 10, 2009
Office Reorganization Extravanganza!

Usually I'd take the opportunity of the weekly newspost to show you something that would shake the very foundations of your soul. Y'know, by showing you the latest and greatest toys or by announcing sales and/or specials.  But instead, I will show you what we've been toiling away on over the past week. You know […]

February 13, 2013
Wednesday Cool Links: Laser Experiments,...

Look! Bird (-shaped bullets) made holes in bird... feathers! Well, not quite, although that would have been awesome too. Actually we were doing some nitrogen-assisted laser tests on various regular, i.e. boring materials, such as plywood and mat board. Then I came across some feathers and here's what it turned out to be: Now that […]

July 12, 2007
BEP Application: Servocore Walker

BEP02-Complete-120_2035.jpg
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart