LMR Start Here Kit, Beetlebot Preorders

Dave Hrynkiw
May 29, 2010

Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome stuff. Like what, you ask?

LMR Start Here KitIf none of you have ever checked out Let'sMakeRobots.com, you're missing out. This is a fabulous community of robot builders - there are always plenty of neat ideas being worked on, totally worth investigating. Like, for example, the Start Here project. This is great for anyone seeking to make one of their first robots with a degree of complexity. Frits has done a fantastic job of laying out the steps, complete with photos and descriptions.  We're proud to announce a partnership with LMR where you can purchase all the parts to build this kit right here, and we'll donate 10% of the proceeds directly to LMR for maintaining their site and building the community.

BeetlebotIn other news, we are, finally, so very close to releasing the long awaited BeetleBot.  It made its debut at the Maker Faire, and now we're just putting our finalizing touches on it for a full release. We're so close, in fact, that we're accepting pre-orders. Follow the above link (or click on the image) to go to the product page. Don't forget to choose your theme - there are four colours for each of the good and evil versions, so choose wisely! If all goes well, we hope to be shipping these orders out during the coming week.

MORE POSTS

August 4, 2010
Geek Engineers wanted

With the departure of our two interns, we're finding that we miss them. Damn them and their desire to complete their education... Since they left, we're finding we have too many projects and not enough hands to get them done. Got  some/any of the following qualifications? Practical experience with sensors Experience with 8-bit embedded computing […]

December 14, 2016
New Product: Connectors

150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long […]

August 9, 2018
Project: Switching Beds for a Better Cut

We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are […]

April 11, 2014
Friday New Product: LilyTwinkle, Teensy ...

It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart