"Little Drum Machine"

Dave Hrynkiw
March 24, 2008

First of all, let me apologized for the delay in getting any posts up lately.

For those who may not know, Solarbotics Ltd. purchased HVW Technologies just over a year ago. This past year has gone by very quickly, and I've had to put down the soldering iron, and sit in front of a keyboard just to wrap my brains around microcontroller-based designs. When one is used to hard-wiring robot brains, using software across four platforms is quite a leap (AVR/PIC/Basic Stamp/PICAxe)!

So wish us a happy 1st anniversary of taking over HVW Technologies - it's been a fun, busy year getting up-to-snuff on all these new cool toys!

Back to the reason for the post. Dan Gates, our intrepid techgeek, forwarded me this amusing link of a robot built from our GMTPkg tread bundle, and a couple of GM10 gear motors. It's not your generic "wander-around" robot. Trust me - watch the video just for a few seconds before you decide to wander off to some other part of the google-video universe...

MORE POSTS

July 12, 2007
2001 Solar Cell Analysis Data - Direct S...

At Solarbotics, we've been getting quite a few questions regarding the "real-world" performance of our solarcells. Although we do have the official Panasonic Sunceram datasheets, it is written in a quite technical manner and does not include practical design data.

May 7, 2007
The return of the MCM...

Remember many, many moons back when Solarbotics was a young company, with just a few hacker-type objects to offer the robotics community? One of these items was the "Metal Cassette Mechanism", and was the heart of a great many Solarengine Kit. Hail the return of the almighty MCM! (Ok, it isn't as earth-shaking as all […]

July 12, 2007
Circuit: Shok

You want a simple Photovore? This very tidy design by Solarbotics' own Grant McKee is based on a technique developed by Mark Tilden - Shok architecture.

September 18, 2003
New Wheels

Remember those bad-boy wheels you saw on Strongbad? Well, they're now available! But be warned - we don't have the sleeve to fix the 2mm shaft to 1/8" hole diameter gap, so you'll have to improvise something yourself. Otherwise, your robot will have a bit of a lope to its roll!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart