Actually, it's been done, but not this nicely. Those guys at Ecole Polytechnique Fédérale de Lausanne (EPFL) have a nice report on their "microglider" project. They do some fine work! Bah. That picture is too small! Let's look at a BIG one! Ooo! And they have more big pictures here! This one is nice - […]
L298 Compact Motor Driver Kit
Dave Hrynkiw
August 11, 2004
Ok, we were fed up with the strange pinouts on the L298 motor driver, and decided to do something about it.
The result is the Solarbotics L298 Compact Motor Driver. It happens to be the same size as a BEP tile, offers four status LEDs, plugs for easy wiring, and screw terminals for motor and battery connections. Did we mention it also has an accessible 5V regulator on-board? Oh yes, it does indeed!
We also specifically designed the CMD kit to let the L298 IC sit flush at the back of the board, so it's easy to bolt it to a heatsink for better thermal sinking.
We hope you like the Compact Motor Driver kit as much as we do - it's been quite helpful in our in-house prototype robot projects!
MORE POSTS
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
BEAM as part of thesis work
Rory Nugent (of Solar Xylophone fame) has posted his thesis presentation to the Interactive Telecommunications Program, which heavily features BEAM devices. By "building things with a sense of life", he's documenting what we've known for a good while - autonomous devices ("pets") offer unusual interesting relationships. Keep up the good work!
Strange set of Atmel '328 ICs...
Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.