We've had some requests on exactly what do the pushpins do. So, we added videos for two of them. Push Pin 1 (Masher Point) Push Pin 3 (Chisel Point)
Interesting stuff at the Exploratorium
Dave Hrynkiw
September 5, 2001
Not exactly relevant to BEAM, but an interesting distraction:
Here's some interesting media from the San Francisco Exploratorium. Notable media to watch is their "Iron Science Teacher" competition (familiar with "The Iron Chef? Same idea...), and their hosting of Robot Sumo Wrestling.
MORE POSTS
Site Difficulties - sorry!
If you were trying to visit us here Friday/Saturday, you would notice that we were "404" (site down). Sorry about that. Our host ISP is going through some changes that are ...aren't... going as well as they'd like. Sorry about the problems. Shouldn't be nothing that we can't get fixed, as soon as I find […]
Rick and Morty Portal Gun
Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]
Dave's Office...
Dave, el Presidente of Solarbotics and HVW Tech, may be difficult to get a hold of due to an inability to get into his office! So if you call and ask for Dave you'll have to wait while we dig him out. And if you are waiting for Dave check out this very cool Star […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.