Interactive String LED Floor Mandala at ...

Dave Hrynkiw
June 1, 2017

Because... of things... Solarbotics didn't do a booth or official presence at this year's Bay Area MakerFaire. We opted to do something fun this time, building a custom just-for-the-fair piece of sorta-interactive LED artwork. Following on the success of the quickie LED floor mandala resting area we did at the NYC MF, we turned it up to 11 for the Bay area, making a WiFi-enabled version of the same thing.

Here's the technical detail on what we did:

The project is based on a modified "Double Rainbow" controller, with the Ardweeny brains replaced by a ESP-12. We set up the three major axis as "always on", with six zones controlled by the controller for animations. We advertised the WiFi SSID point and the URL for people to login to select one of the 6 animations available.

Dan set us up a nice 10' layout cord to speed layout of the major axis:

  

The franken-Double-Rainbow merged with the ESP-12F.

Setup at the Faire grounds, with our co-founder & CFO, Cheryl. The darkroom (Expo hall..2?) has a very hard rubber floor, so installing them directly to the floor would have turned the LEDs to dust with all the foot traffic. It took us 2 hours and some negotiating to find a 12'x20' carpet at a local Home Depot to mount the piece.

Floor Mandala in full operation! We had zero complications with the piece, other than the WiFi point saturating and not allowing us to login ourselves. Nothing a quick reboot didn't fix.

Sunday, and the lights have just come up at the Maker Faire. Cheryl, Alan Yates, and Elizabeth (sales coordinator extraordinaire) and two other tired attendees are getting ready to wrap up.

Peel up the art and signage, and you get ...more art! Remember, this was brand new (end-of-roll) carpet. That's what several thousand dirty feet can do to a carpet over a long weekend.

Interesting thing about going from a static LED display (in NYC) to a dynamic display is people (especially children) were interacting with it as if their footsteps were making things happen. Huh. We didn't expect that. I suppose the most natural interaction with blinky lights is to turn them on and off physically (not via your cell phone). Lesson learned for next time!

MORE POSTS

November 14, 2014
Friday New Products: Microphone Accessor...

New product for your attention: Electret Microphone Breakout $7.95 Audio sensors & mics have to be amplified just right for best response. Here's a tidy unit engineered by Sparkfun to make adding an electret mic to your project easy. MEMS microphone board $9.95 Newer MEMS microphones give much better response than older style electret mics, […]

March 13, 2019
Chug-O-Meter Celebrating Arduino Day �...

Isn’t it nice when you can hit two birds with one stone? That’s exactly what we’ve done as we approach both Arduino Day and Saint Patrick’s Day with our version of the Chug-O-Meter! We absolutely loved what the circuit.io team did with their Chug Meter but thought that we could add more to its survivability […]

October 17, 2008
Austin Maker Faire 2008

It's that wonderful time of year when you can see your breath in the air while you wait at the bus stop. Frost decorates the blades of grass, motorists spend five minutes scraping ice off the windshield  before departing and there are hints of snow when you look up at the hills. So what's a […]

March 15, 2011
Zendulums for Japan

Effective immediately, all the proceeds from the sale of Zendulum kits will be going to the Red Cross efforts in Japan. We'll change up the Zendulum laser artwork to note it as such shortly, and post the new pic. (Done!) Fractured Hinomaru inspired by James White's "Help Japan" poster.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart