Interactive String LED Floor Mandala at ...

Dave Hrynkiw
June 1, 2017

Because... of things... Solarbotics didn't do a booth or official presence at this year's Bay Area MakerFaire. We opted to do something fun this time, building a custom just-for-the-fair piece of sorta-interactive LED artwork. Following on the success of the quickie LED floor mandala resting area we did at the NYC MF, we turned it up to 11 for the Bay area, making a WiFi-enabled version of the same thing.

Here's the technical detail on what we did:

The project is based on a modified "Double Rainbow" controller, with the Ardweeny brains replaced by a ESP-12. We set up the three major axis as "always on", with six zones controlled by the controller for animations. We advertised the WiFi SSID point and the URL for people to login to select one of the 6 animations available.

Dan set us up a nice 10' layout cord to speed layout of the major axis:

  

The franken-Double-Rainbow merged with the ESP-12F.

Setup at the Faire grounds, with our co-founder & CFO, Cheryl. The darkroom (Expo hall..2?) has a very hard rubber floor, so installing them directly to the floor would have turned the LEDs to dust with all the foot traffic. It took us 2 hours and some negotiating to find a 12'x20' carpet at a local Home Depot to mount the piece.

Floor Mandala in full operation! We had zero complications with the piece, other than the WiFi point saturating and not allowing us to login ourselves. Nothing a quick reboot didn't fix.

Sunday, and the lights have just come up at the Maker Faire. Cheryl, Alan Yates, and Elizabeth (sales coordinator extraordinaire) and two other tired attendees are getting ready to wrap up.

Peel up the art and signage, and you get ...more art! Remember, this was brand new (end-of-roll) carpet. That's what several thousand dirty feet can do to a carpet over a long weekend.

Interesting thing about going from a static LED display (in NYC) to a dynamic display is people (especially children) were interacting with it as if their footsteps were making things happen. Huh. We didn't expect that. I suppose the most natural interaction with blinky lights is to turn them on and off physically (not via your cell phone). Lesson learned for next time!

MORE POSTS

June 28, 2013
OpenBeam's Fantastic Kossel Pro 3D Print...

It's pretty amazing to see the adoption rate of 3D printers in the last few years, and the kind of creativity they bring out in people. I've seen quite a few variations, particularly while walking through the 3D printer villages at the MakerFaires I've already attended (either as a vendor or just a visitor), but […]

April 1, 2009
PIMP YO' SUMO!

The biggest complaint we've ever had is that the Sumovore is boring. I mean, yeah, it can beat the tar out of most other sumos in the ring without batting an eye. But it's just so boring to watch. It'd be funner to watch the paint dry on a pot of boiling water. So, after […]

October 2, 2007
Tah-DAAAA! Welcome to the new digs!

...And by "digs" I mean website! Thanks to all of you who've dropped in for a looky-loo while the paint dries. We're still (metaphorically) moving the furniture in, but everything is ready to roll. Stay tuned while we finish tweaking and installing new content! Thanks, Dave

July 3, 2012
SB-FireFly Hacks: Round 1

Jeremie, our engineer and the brains behind the SB-FireFly, can't seem to put the thing down even though it's all done and released. He's been hard at work figuring out what it's capable of, and figures that the hardware and framework could be used for a Micro-TV-B-Gone broadcaster, IR code repeater, and even a tiny […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart