Ice Cream, ArdJet and (New) Stuff

Dave Hrynkiw
January 12, 2012

Free Day 2012Well, it certainly has been a busy week! Particularly for our pals over at SparkFun, who just wrapped up their third annual Free Day. This is quickly becoming a favourite spectator sport around the office, as every year we tune in to watch the available money evaporate and/or their website/servers die a horrible, horrible death. As in years past, we sent along a lil' SB lovin' for the hardworking SparkFun crew. This time around it was some complimentary ice cream to help cool down after a long day (some of us thought we should order a few sledgehammers instead, so the SF team could dispense some Solarbotics-style troubleshooting for whatever IT problems popped up). You can see SparkFun's appreciation for our delicious treat written on the inside of a box in the photo to the left.

ArdJet ProgrammerIn other news, Jetty over at Thingiverse just released a super awesome project called the ArdJet Programmer. He's made (in his words) "a cheap, easy to build ISP (In System Programmer) which you can use to write the bootloader to an Extruder or Arduino Mega or any other Arduino board with an ICSP connection." Our favourite part, of course, is that uses an Ardweeny for some of the guts. Regardless, it's a very nice build and he's done an excellent job with the resources and instructions. He's done a great job at keeping the size compact, using space very efficiently.

New Products

We won't lie. This week's collection of new products isn't the most inspiring or exciting. But that's okay, because we've included a button and a switch. And everyone loves buttons and switches.

Infrared Sensor Jumper Wire - 3-Pin JST Infrared Sensor Jumper Wire - 3-Pin JST - $1.50 USD / $1.58 CAD
Three pin JST connector with red, black, and yellow colored wire. 5 inches of wire length, perfect for interfacing SHARP analog Infrared sensors to your project.
SPST - 6.2mm Momentary Tactile Pushbutton SPST - 6.2mm Momentary Tactile Pushbutton - $0.70
These 4-pin momentary-contact SPST (Single Pole, Single-throw) switches are great for sending reset signals.
ARDX Arduino Mega Base Kit ARDX Arduino Mega Base Kit - $6.95
Usually when you see Mega and Bass in the same sentence it's not usually about Open source microcontroller platforms, but in this case it is! Well that's kind of a stretch cause we're really talking about the Arduino Mega Base Kit which allows you to attach your rogue Arduino Mega (or compatible board) to a ARDX experimenter's platform.
ARDX Acrylic Base Kit ARDX Acrylic Base Kit - $6.95
Wrangle in your loose Arduino - you don't want them going rogue, so tie it down to an ARDX experimenter's platform!
CR2032 3V Lithium Coincell Battery CR2032 3V Lithium Coincell Battery - $1.95 USD / $2.05 CAD
This is a VERY common regulated 12 VDC 2000mA output power supply used for many common gadgets.
CR2025/CR2032 Coincell Battery Holder CR2025/CR2032 Coincell Battery Holder - $0.49 USD / $0.52 CAD
Here's a coin cell holder for mounting the most common types of coin cell batteries: CR2032 and CR2025. You could try other batteries but we're guessing you won't have much luck with 'AA's.
SPDT Momentary Toggle Switch SPDT Momentary Toggle Switch - $3.25 CAD / $3.45 CAD
Check this action out - It's a panel mount toggle switch, Yay! This switch is unique in it's operation as it has a spring inside that automatically returns the switch to the center-OFF position.
5mm Water-clear Phototransistor 5mm Water-Clear Phototransistor - $0.45
This 5mm Water-clear Phototransistor will pick up visible and infrared light and conduct current. When light reaches this high sensitive/fast response time component it's much like current reaching the base of a transistor which allows current to flow from collector to emitter.

Yup. Look at all them mighty fine lookin' button and switches. Both of 'em. We'll leave you to bask in their warmth and glow until next week.

MORE POSTS

December 6, 2010
As with baking...

...DON'T FORGET ABOUT THE OVEN. You'll burn the cookies while eating the dough! Just got a new LOUD oven timer to make sure somebody is standing over the PCBs when the timer is about up. Pick and place machines tend to drown out gentle oven beeps!

July 14, 2005
More RoboRaptor news...

Got another update from Chance "knitsu" Brown that he's got some high-resolution images and videos of his Roboraptor online now. After some initial browsing, didja know that there's going to be two books on the Robosapien soon? And there's several online communities? (Here's one)

February 26, 2002
Vancouver BEAM Workshop

Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html

October 25, 2017
Solarbotics at Maker Faire Calgary

Are you located in or around Calgary? Do you like cool projects and neat-o people making neat-o things? Are you looking for something mega-awesome to do this weekend? If you answered yes to all (or any) of these questions, we have some good news for you: The Maker Faire Calgary is happening this weekend. There'll be lots […]

1 8 9 10 11 12 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.