Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
HexPummer Lanterns!
Dave Hrynkiw
November 13, 2008
Our K HP HexPummer has always been a good, steady kit, but once we got our laser-cutter, we started experimenting... and was it ever neat to tuck one of these into a faux Japanese-style lantern! After upgrading two of the four LEDs with super-crazy-mega-bright LEDs, this solar-powered night-activated light show is quite a cool decoration, suitable for a window-sill or hanging from a tree branch.
The K HP-L HexPummer Lantern kit comes with:
- HexPummer kit featuring
- SCC3733a-MSE 37x33mm 6.7V solar cell
- 1000mAh NiMH batteries
- 2 standard & 2 upgraded LEDs (upgrading all 4 draws too much power to last all night)
- Extended solar cell wire for top or side-mounting
- Laser-cut Mattboard lantern kit
- Light-diffusing interior sleeve
But what about all the fine folks who already have the Hex Pummer, and want to add some of this awesome lantern goodness? Well, we have you covered - You'll find just the lantern construction materials (along with two super-crazy-mega-bright LEDs) available in the K HP-LA HexPummer Lantern Addon kit.
The best part is that you get to personalize it by choosing the lantern colour and the artwork set. We sampled some of these new colors and (custom MAKE) themes at the 2008 Austin Maker Faire.
Take a look at the art-sets and colours on the product page, and if you are so inclined, we may even be able to do personalized artwork for a really custom Lantern (contact us if you're interested!).
MORE POSTS
Arduino Uno and Neeeew York City!
We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too. One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
New Product: Bare Conductive & Para...
Touch Board 128.83 CAD / 99.95 USD 128.83Design with paintable sensors. Turn touch into sound and make any surface interactive. Electric Paint 50ml Jar 39.50 CAD / 30.45 USD Create circuits on paper with this versatile conductive electric paint! Touch Board Starter Kit 187.65 CAD / 145.50 USD Draw, paint, and create. Three projects to get […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.