We've been busy gathering new BEAM products, and now with the release of the new website engine, we're able to finally post them! New: CP.047F - 0.047F 5.5V capacitors CP10F - 10F 1.6V capacitors (return of an old favourite!) MCM2 - a new metal cassette mechanism with very cool parts VPM - a tiny disk […]
HexPummer Lanterns!
Dave Hrynkiw
November 13, 2008
Our K HP HexPummer has always been a good, steady kit, but once we got our laser-cutter, we started experimenting... and was it ever neat to tuck one of these into a faux Japanese-style lantern! After upgrading two of the four LEDs with super-crazy-mega-bright LEDs, this solar-powered night-activated light show is quite a cool decoration, suitable for a window-sill or hanging from a tree branch.
The K HP-L HexPummer Lantern kit comes with:
- HexPummer kit featuring
- SCC3733a-MSE 37x33mm 6.7V solar cell
- 1000mAh NiMH batteries
- 2 standard & 2 upgraded LEDs (upgrading all 4 draws too much power to last all night)
- Extended solar cell wire for top or side-mounting
- Laser-cut Mattboard lantern kit
- Light-diffusing interior sleeve
But what about all the fine folks who already have the Hex Pummer, and want to add some of this awesome lantern goodness? Well, we have you covered - You'll find just the lantern construction materials (along with two super-crazy-mega-bright LEDs) available in the K HP-LA HexPummer Lantern Addon kit.
The best part is that you get to personalize it by choosing the lantern colour and the artwork set. We sampled some of these new colors and (custom MAKE) themes at the 2008 Austin Maker Faire.
Take a look at the art-sets and colours on the product page, and if you are so inclined, we may even be able to do personalized artwork for a really custom Lantern (contact us if you're interested!).
MORE POSTS
New Product: Connectors
150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long […]
New Bundle: The Northern Lights!
Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
Robotgames registration is open
The Western Calgary Robot Games is fast approaching. It's held here in our own hometown of Calgary Alberta, and I can tell you that after visiting most of the major competitions on the west coast of North America, it's one of the most prize-generous! The registration page is now open, so get registered and come […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.