Don't expect too much productivity out of Solarbotics in the next 11 days as the Calgary Stampede commences tomorrow morning with the annual parade. The boss (me, Dave) is giving the morning off to the staff to see the festivities, so we'll be open at 1pm Friday July 8. As for the better part of […]
Heated Car Seat Teardown and Repair
Solarbotics Ltd
January 11, 2017
Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working.
Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...
Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.
Broken wires:
The old wires had a PVC jacket that had dried out and cracked.
The wires would then flex at these cracks and break:
We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.
Sketchy Safety?
Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.
Repaired
All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.
All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.
MORE POSTS
Protel v2.8 Demo Disks
This is a very nice little demo package from Protel of a PCB layout program. It's an older package (they don't even have this on their website anymore), but works on any windows platform, unlike their current demo versions.
New Servo-liciousness
For far too long we've toiled under the merciless grip of the Gear Motor. But no more! For behold, there appears a trio of defiant servos to overthrow the tyrannical rule! *cough* But seriously forks, we have three new units available from Grand-Wing Servo. The 22140 GWS Modified Servo is a useful continuous rotation, full-sized unit. […]
Roundabout Pieces!
David Cook wrote a book. That book is a technically a Cook book, but we won't call it that. We'll call it Intermediate Robot Building (no, we don't have it yet, we're still waiting for our order!), and it heavily features the Roundabout Robot. If you're familiar with Mr. Cook's first book Robot Building for […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.