Heated Car Seat Teardown and Repair

Solarbotics Ltd
January 11, 2017

Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working.

Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...

Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.

Broken wires:

The old wires had a PVC jacket that had dried out and cracked.

“heated

“heated

The wires would then flex at these cracks and break:

“wires

We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.

“Groovy

“Image

Sketchy Safety?

Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.

“cheap

“cheap

Repaired

All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.

“broken

All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.

“A

MORE POSTS

August 14, 2017
New Product Monday

AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]

July 6, 2001
Faster Download Times!

We are improving the site once again! You'll notice that our Products, Galleries, and Old News page(s) will load faster. All the same information is there, it just has a more streamlined approach, reducing the download time (especially for Sherline Machines!). So check it out! Read More...

June 12, 2003
Solarbotics WCRG mini-sumo workshop

The night before WCRG, and all through the office, not a creature was stirring...except two dozen mini-sumo robots - AAAHH! Thanks to Alberta Printed Circuits, we were able to sponsor a mini-sumo workshop to build 24 robots to compete in the next day's Western Canadian Robot Games.

December 15, 2015
Christmas Eve Shipping Deadlines

Within Canada Purolator Air - Dec 23 Purolator Ground - Dec 16 Canada Post Expedited - Dec 11 Canada Post Xpresspost - Dec 22 To The United States UPS Express (to United States) - Dec 22 UPS Ground (to United States) - Dec 12 USPS Expedited (to United States) - Dec 9 Xpresspost (to United […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart