Heated Car Seat Teardown and Repair

Solarbotics Ltd
January 11, 2017

Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working.

Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...

Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.

Broken wires:

The old wires had a PVC jacket that had dried out and cracked.

“heated

“heated

The wires would then flex at these cracks and break:

“wires

We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.

“Groovy

“Image

Sketchy Safety?

Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.

“cheap

“cheap

Repaired

All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.

“broken

All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.

“A

MORE POSTS

November 14, 2012
Wednesday Confusion Post: Outages, Star ...

Some quick heads-up: Apparently the road to recovery in New York is still fairly rough, and as a result our datacenter company is facing some intermittent outages. We appreciate your patience while our site fights off the hiccups. Random piece of information: did you know the collective nouns for a group of weasels include boogle, […]

November 24, 2010
Ardweeny BackPack - Red and Blue!

Finally got them through the Pick and Place machine, tested, and ready to go. Check out the blue and green versions! (We're still kicking around a VU-type Greeeeen/Yel/RED version too. What do you think?) By the way, we've got some pretty decent sample code on how to use your Ardweeny Backpack (and thusly, any Arduino-compatible) […]

November 24, 2017
Solarbotics at Calgary Expo Holiday Mark...

If you are in Calgary & area this weekend, come see us at BMO Centre Expo Holiday Market. On November 25 & 26, 2017 we are going to be at booth 1314 with our new and all-time favorite gadgets.  The hours of the show are: Saturday 10-6, Sunday 10-5.

December 9, 2010
From the Inbox...

It's always nice to get feedback (especially when it's complementary!):  I have to let you know about my experience with your company this Christmas season. I wanted to purchase a robotic kit for my husband who had never build a kit before. I called to get some information as I am very much a novice, […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.