That's it. We've had enough. The weather is just too darn nice outside. So nice, in fact, that we quit. That's right, when Monday rolls around no one is even going to bother coming into the office. You heard us - we'll be closed on Monday, August the 6th. Go ahead and email and leave […]
Heated Car Seat Teardown and Repair
Solar botics
January 11, 2017
Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working.
Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...
Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.
Broken wires:
The old wires had a PVC jacket that had dried out and cracked.
The wires would then flex at these cracks and break:
We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.
Sketchy Safety?
Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.
Repaired
All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.
All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.
MORE POSTS
BareConductive Tutorials
Our friends at Bare Conductive, whose awesome lineup of products we carry, shared a few more interesting how-to tutorials (previously).
The 2004 Robotgames are over...
...and it was fun! Solarbotics was busy, showing off our new kits and gear motors, and shaking hands with a large number of our customers. Yeah, there weren't any "official" BEAM events, but we still had a good time running our Solarbotics-sponsored SolarSpeeder race, with the winner being 8(?) year old Devon Bateman (taking home […]
New SCC3733a-MSE Solarcell
What's so special about the new SCC3733a-MSE? Two things: It's machine-assembled with new high-quality Russian solar cells (the best commercial cells we've tested yet) It comes with a Miller Solarengine circuit pre-etched on the rear of the solarcell! We have only a limited number of these cells presently, so if you're looking for the absolutely […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.