Heated Car Seat Teardown and Repair

Solar botics
January 11, 2017

Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working.

Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...

Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.

Broken wires:

The old wires had a PVC jacket that had dried out and cracked.

img_20161215_105440img_20161215_111911

The wires would then flex at these cracks and break:img_20161215_111838

We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.

img_20161215_111817img_20161215_111853

Sketchy Safety?

Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.

img_20161215_1158382img_20161215_115850

Repaired

All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.

img_20161215_115256

All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.

img_1154

 

MORE POSTS

January 30, 2014
Wednesday Links: Pulse Jacket, Wassilisc...

Today I wanted to share a how-to of one of my projects with you. So once I had some cats. And an extra apple tree. And I wanted to be noticed in the dark. So I made some fruit batteries out of apples and attached them to the running jacket. This way I could burn […]

May 4, 2012
Credit Card Woes

Thanks to some information provided to us by a very determined customer (Thanks Erin!), we've been able to pin down why some of your credit cards were being declined. We've been able to correct and verify that this bug has been resolved, so those of you who have been declined while using an otherwise valid […]

January 25, 2002
BEP Documentation Correction...

Just a quick note for those of you who have been trying to build the SC1 Servocores with the 0.01uF capacitors as listed in the parts list. That's an error! 0.1uF is just fine. Documentation has been revised accordingly. Sorry for the error!

November 13, 2002
Sumobot Circuits

We've been having fun playing with the L293D driver chip. It's one of those things to see how much you can make it do by itself (like with any BEAM application!). Grant McKee has been experimenting with some simple additions to the chip to make it (unto itself) a suitable brain for a simple mini-sumo […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart