Heated Car Seat Teardown and Repair

Solar botics
January 11, 2017

Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working.

Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...

Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.

Broken wires:

The old wires had a PVC jacket that had dried out and cracked.

img_20161215_105440img_20161215_111911

The wires would then flex at these cracks and break:img_20161215_111838

We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.

img_20161215_111817img_20161215_111853

Sketchy Safety?

Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.

img_20161215_1158382img_20161215_115850

Repaired

All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.

img_20161215_115256

All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.

img_1154

 

MORE POSTS

May 14, 2015
Make Something Useless Useful Update

We've been trying to Make Something Useless Useful since 2012. In order to do that we've been donating a percentage of past sales of the Useless Box to Plan Canada. In year 2013 $5,000 went to Plan Canada' Gift of Hope School Construction in Honduras.

May 25, 2004
Content Added

Well, it's not exactly news, but we have managed to import most of the old content back into the site. There are still a few more additions to go, but this should keep you tinkering on new projects until then. Head over to the BEAM Resources section for the added BEP Applications, Photo Galleries, and […]

March 15, 2004
New Solar Cell!

As Panasonic is no longer manufacturing their line of Sunceram solar cells, we've been on the hunt for suitable replacements. Here's our first find - the SCC3733! It's a polycrystaline cell in an epoxy casing, so it's a bit heavier, but much, much less prone to breaking or burning off of the solder-pads. It's also […]

March 19, 2001
Los Alamos BEAM Workshop

We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart