Well folks, ever since the phone uprising last month, the meatsacks staff have been mumbling something about their own mutiny. It would appear that the time off at Christmas was not enough for them and their families, so we're giving in and letting them join the rest of Canada in celebrating Family Day on Monday, […]
Heated Car Seat Teardown and Repair
Solar botics
January 11, 2017
Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working.
Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh temperature changes with frequent (very) cold weather heating and cooling cycles, adding to a situation ripe for a malfunction, which happened to one of our staff when he couldn't warm up his tush one cold Canadian morning...
Dragging it into the lab, we peeled back the covers to discover the usual and not-so-usual suspects.
Broken wires:
The old wires had a PVC jacket that had dried out and cracked.
The wires would then flex at these cracks and break:
We replaced those wires with our GroovyNoodle silicone wire, which is able to resist flexing and temperature fluctuations very well.
Sketchy Safety?
Here's a picture of the sketchy activation switch we found inside the bottom part of the seat. It's designed to close when under "bum load", and directly pass power to the heating coils. We're not experts at auto-grade accessory manufacturing, but we were surprised that it wasn't a logic "bum-detected" switch that triggered a suitable relay or FET elsewhere. And the lack of a thermal reset fuse surprised us.
Repaired
All broken wires replaced! Almost all the PVC jacket wire had cracked and disintegrated, so we replaced it with our better-quality GroovyNoodle silicone wire. This wire is extremely flexible, high strand count, and a temperature-ignoring silicon jacket. Perfect for inside this car seat heater.
All necessary repairs and upgrades were done just in time for the next stretch of (very much) cold Canadian winter.
MORE POSTS
Back on Track
Hey everyone, while parts of Calgary are still in recovery, things are now back to normal on our end. We're processing and shipping out on schedule, and unless you're in a flood-affected area you'll be receiving your order on time. Thanks for your patience!
Postal Strike - Important Note for Shipp...
Update: Looks like Canada Post is doing a rotating strike, so only one city will be affected at a time. This means that, most likely, orders shipped via postal methods will only be delayed 2-3 days. Purolator and UPS options are not impacted, and have no delays. Ok class, fictional robotic history refresher course 101: […]
Solarbotics at MakerShed
Yeah, you got it: at the Bay Area Maker Faire, on May 17 and 18, 2014. With some exciting new stuff. It requires sun, balls and mice. And no, it is not a solar-powered feline. It is much better. (Note: mice mention was only for confusion purposes, I confess). In any case, whatever it is, […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.