Happy First Week of September everyone! The kids are all back in school and there's that certain holiday right around the corner. Apparently Labour Day celebrates "the economic and social achievements of workers." And what a better way to celebrate than to not work! That's right - on Monday, September the 7th Solarbotics and HVW […]
Golem at Calgary Comic Expo
Solar botics
September 21, 2016
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem.
Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving.
Alternately, since we first worked on the Golem, we've been bringing in a variety of effects pieces that would have been very handy to have for this rebuild, like our hard-wire and SuperFlex LED strings for detail crack lighting, and solo WS2812B pixel LEDs for the crystal elements.
We've also since started carrying some wonderful costuming materials called Fosshape and Wonderflex which heat form and paint excellently, and would have been quite useful for some of the other structural elements.
As it was, we used a variety of our own in-house parts to retrofit Golem:
Lights in the crystals: Super Bright 5mm LED (SBLED)
All lighting driven by: Solarbotics Ardweeny (KARDW)
Double Rainbow RGB LED strip controller for Ardweeny (60170)
Jaw action powered by Servo S03N (Servo)
Arm, chest & groin tubes, lights in stone cracks: 12V Cold White LED Strip (60522)
FETs controlling the weapon’s light: ZVN2106 FET (TRZVN2106)
MORE POSTS
The Solarbotics Repairacord™ Electroni...
Everyone is familiar with paracord bracelets - the cleverly woven wearable survival device that instantly unravels into many meters of useful and super strong nylon cord in case of necessity. These are useful for outdoorsy types, but what if you are an indoorsy type with a lot of electronic emergencies? Or a geek in need […]
New Products: EggBot Pro, Batteries, Ras...
We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early: Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO!
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.