Well, my stint as Makezine's Soldering Makecation councellor is over. Last thing to do is go over the entries and pick some winners. See them here!
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem.
Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving.
Alternately, since we first worked on the Golem, we've been bringing in a variety of effects pieces that would have been very handy to have for this rebuild, like our hard-wire and SuperFlex LED strings for detail crack lighting, and solo WS2812B pixel LEDs for the crystal elements.
We've also since started carrying some wonderful costuming materials called Fosshape and Wonderflex which heat form and paint excellently, and would have been quite useful for some of the other structural elements.
As it was, we used a variety of our own in-house parts to retrofit Golem:
Lights in the crystals: Super Bright 5mm LED (SBLED)
All lighting driven by: Solarbotics Ardweeny (KARDW)
Double Rainbow RGB LED strip controller for Ardweeny (60170)
Jaw action powered by Servo S03N (Servo)
Arm, chest & groin tubes, lights in stone cracks: 12V Cold White LED Strip (60522)
FETs controlling the weapon’s light: ZVN2106 FET (TRZVN2106)
Well, my stint as Makezine's Soldering Makecation councellor is over. Last thing to do is go over the entries and pick some winners. See them here!
I had been giving some advice to Mark Malmberg about some art he's been putting together. Wanna see a killer huge solar-powered hanging mobile? From the builder himself: This piece has been a test piece and learning experience. I'll show it in a couple of months at a place called the Lawrence Hall of Science […]
Well, we had a fun time at this year's Western Canadian Robot Games! Especially since Solarbotics' own Grant McKee won advanced minisumo with "Ender's Wraith", and although he also placed 2nd with "S.S. Solo" (but wasn't legally able to win 2 spots), the third place bump up went to...me! Dave Hrynkiw, with 2Strong2Bad! Besides the […]
Remember those bad-boy wheels you saw on Strongbad? Well, they're now available! But be warned - we don't have the sleeve to fix the 2mm shaft to 1/8" hole diameter gap, so you'll have to improvise something yourself. Otherwise, your robot will have a bit of a lope to its roll!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.