We've already blogged about the Technology Grad Dresses, which are accompanied by the Starry Night Pendant as a perfect finishing touch to complete the outfit. Since then, we've upgraded and improved the Pendant design to make it a fully documented kit, rather than just a bundle: The 2xAAA battery holder offers longer life, less cost […]
Golem at Calgary Comic Expo
Solar botics
September 21, 2016
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem.
Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving.
Alternately, since we first worked on the Golem, we've been bringing in a variety of effects pieces that would have been very handy to have for this rebuild, like our hard-wire and SuperFlex LED strings for detail crack lighting, and solo WS2812B pixel LEDs for the crystal elements.
We've also since started carrying some wonderful costuming materials called Fosshape and Wonderflex which heat form and paint excellently, and would have been quite useful for some of the other structural elements.
As it was, we used a variety of our own in-house parts to retrofit Golem:
Lights in the crystals: Super Bright 5mm LED (SBLED)
All lighting driven by: Solarbotics Ardweeny (KARDW)
Double Rainbow RGB LED strip controller for Ardweeny (60170)
Jaw action powered by Servo S03N (Servo)
Arm, chest & groin tubes, lights in stone cracks: 12V Cold White LED Strip (60522)
FETs controlling the weapon’s light: ZVN2106 FET (TRZVN2106)
MORE POSTS
Arduino Leonardo Preorder, Cool Link Wed...
Big news! We've put in an order to bring in a schwack-load (a scientific unit of measurement) of the new n' shiny Arduino Leonardo. We can't quite say when they're set to arrive, though, but we're hoping it'll only be a few weeks...ish. Looks like this will be a really popular board, due to the impressive […]
BIO BUGS Press Release
Wowwee sent us some information telling us a bit more about the upcoming Bio Bugs that Mr. Tilden is working on. It includes an image showing some of the finished prototypes, and more "Official" stats on these upcoming toys! Check it out! Read More...
Circuit: L293D Mini-Sumo
This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.