We just received a huge order of our GM4 Clear Servos, so they are now available to order again! Read More...
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem.
Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving.
Alternately, since we first worked on the Golem, we've been bringing in a variety of effects pieces that would have been very handy to have for this rebuild, like our hard-wire and SuperFlex LED strings for detail crack lighting, and solo WS2812B pixel LEDs for the crystal elements.
We've also since started carrying some wonderful costuming materials called Fosshape and Wonderflex which heat form and paint excellently, and would have been quite useful for some of the other structural elements.
As it was, we used a variety of our own in-house parts to retrofit Golem:
Lights in the crystals: Super Bright 5mm LED (SBLED)
All lighting driven by: Solarbotics Ardweeny (KARDW)
Double Rainbow RGB LED strip controller for Ardweeny (60170)
Jaw action powered by Servo S03N (Servo)
Arm, chest & groin tubes, lights in stone cracks: 12V Cold White LED Strip (60522)
FETs controlling the weapon’s light: ZVN2106 FET (TRZVN2106)
We just received a huge order of our GM4 Clear Servos, so they are now available to order again! Read More...
Earlier in January we had a very interesting discussion with the chief geeks at Evil Mad Scientist Labs. They've been doing similarly-unique DIY as Solarbotics for a good long time, but they had now found themselves in the position of shuttering their operation to take some lead rolls with Bantam Tools. This meant moving from […]
We've already blogged about the Technology Grad Dresses, which are accompanied by the Starry Night Pendant as a perfect finishing touch to complete the outfit. Since then, we've upgraded and improved the Pendant design to make it a fully documented kit, rather than just a bundle: The 2xAAA battery holder offers longer life, less cost […]
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.