Our website will be down for server maintenance on Sunday March 10th, 2013 between 1.30am to 11.30am MST (3:30 and 7:00 am EDT). We apologize for the inconvenience.
GM2 Modifications
Dave Hrynkiw
August 29, 2002
Our GM2 gearmotors are powerful, and just a bit slower than a standard servo, making them ideal for a walker. But for you folks who like wheeled robots, these are simply too slow.
Solarbotics' own Grant McKee to the rescue! We barely had the motors opened 10 minutes before Grant figured out that these motors (the GM2 in particular) were able to be hacked into a much speeder 14:1 ratio down from their original, very torquey 224:1.
MORE POSTS
GM15s back in stock!
Sorry about the delay in making these available. These tiny 25:1 pager-sized gear motors are difficult to get built. BUT, we finally have more GM15 gearmotors in stock!
Friday New Product: Linear Rails, Power ...
Halloween is over - lets eat up our pumpkin leftovers, get ready for gift giving season and stock up on some vitamin D for the winter season! For new product today we got Third Hand. That's important. It’s a kit that comes with surgical thread and a little anesthetic fluid as well as a handy […]
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.