PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. T-Bolt Accessory (pairs) […]
GM2 Modifications
Dave Hrynkiw
August 29, 2002
Our GM2 gearmotors are powerful, and just a bit slower than a standard servo, making them ideal for a walker. But for you folks who like wheeled robots, these are simply too slow.
Solarbotics' own Grant McKee to the rescue! We barely had the motors opened 10 minutes before Grant figured out that these motors (the GM2 in particular) were able to be hacked into a much speeder 14:1 ratio down from their original, very torquey 224:1.
MORE POSTS
eSun Funky Filament & Creality CR10...
From sparklebarf to foam, what else is new from the world of eSun 3D filaments?
New BEP Application
Grant McKee has been working hard using BEPs in a good many applications around the office, so we've got him to put together a simple application of the BEP - the Pummer nocturnal Strobe. We'll be posting other BEP applications under the 'Special Projects' gallery, so check back once in a while!
Sumovores roll over Italy again!
Another msg from our Italian contacts: Sumovores do well at the Pisa! Here's a Google-translated link.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.