Well, it's been a riveting week. We did all sorts of exciting things, like definitely not riding a pallet jack down a flight of stairs and off a totally awesome jump. Nope, didn't happen at all. And just like how our tech's face didn't connect with the ground after the jump he didn't take, we […]
GM2 Modifications
Dave Hrynkiw
August 29, 2002
Our GM2 gearmotors are powerful, and just a bit slower than a standard servo, making them ideal for a walker. But for you folks who like wheeled robots, these are simply too slow.
Solarbotics' own Grant McKee to the rescue! We barely had the motors opened 10 minutes before Grant figured out that these motors (the GM2 in particular) were able to be hacked into a much speeder 14:1 ratio down from their original, very torquey 224:1.
MORE POSTS
Netduino!
Not just another *uino clone, as this uses a 32-bit Atmel AT91SAM7X ARM microcontroller. Sure, it uses the same form factor (well, except for the breadboard-friendly mini version), but the Netduino uses the .NET micro framework. What's that mean? Well, you're using a hugely more capable microcontroller (8-bit vs 32 bit), with much more memory […]
Egg-cellent Art
ArtBots 2008 was held on September 19-21 in the Science Gallery at the Trinity College in Dublin, Ireland. The show featured 15 works of art by 16 artists from 9 countries. Solarbotics Ltd was proud to provide several demo robots to the Science Gallery to use during ArtBots for their “hands-on” robot display. One of […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.