It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]
GM17 Accessories and Gears/Pinions/Spurs
Dave Hrynkiw
March 13, 2009
If you'll recall correctly, in last week's news post I said something along the lines of "Keep an eye out for new PICAXE bundles in the coming week." But I was quickly bound and gagged by a pack of vicious lawn gnomes (packing lawn gnome-sized guns, no less), preventing me from fulfilling the promise. So I had to do the next best thing:
The guys over at Didel are pretty cool. Among a big collection of nifty parts and bits, they have two things which were of particular interest that we just had to show all of you. First are few accessories for our GM17 that'll really help you get more out of your unit:
- 51:1 and 104:1 Rome Gears (for changing the gear ratio of your motor)
- Encoder (a really cool quadrature encoder and motor driver)
- Motor Brackets (specifically designed aluminum fixtures)
And second, a fist-full of small spurs and pinions that are just perfect for certain pager motors:
0.61mm 9-Tooth Pinion - 0.97mm 9-Tooth Pinion
- 0.97mm 12-Tooth Pinion
- 36/12-Tooth Spur
- 48/12-Tooth Spur
- 60/12-Tooth Spur
- 81/12-Tooth Spur
- 8mm Worm Gear
*whew!* That's a lot of neat-o stuff. You'll find them all in the Motor Accessories category.
In the mean time, keep an eye out and look for those USB PICAXE bundles to be available early to mid next week. Of course, that's assuming the evil lawn gnomes don't make another move. But don't fear - we've contracted some mercenary lawn flamingos to keep them at bay. Now there's a group of garden decorations you don't want to mess with.
MORE POSTS
Wednesday Links: Tattoos, Laser Cutting ...
Temporary Tattoos to Monitor Vitals An lighter more wearable alternative to FitBit (Via Beautiful Decay) Laser-Cut Wood Illustrations Layering laser-cut wood taken to a whole new level, by Martin Tomsky (Via Colossal) Tiny V8 Engine Out of Paper Paper can be exceptionally sturdy, especially when strengthened by glue. By Aliaksei Zholner (Via Gizmodo) REM Detection […]
Friday New Product: Metric Hardware
It's another Friday and we are back with the product that makes sense - it is metric! It is not measured in twips, poppyseeds, barleycorns, yards, furlongs, or any of this funny stuff. It's your good old straightforward decimals. Metric 2.5mm Hex Nut - 25 Pack $4.00 Metric M2.5 Hex Nut, in packs of 25, […]
Solarbotics at the ECRG
Well, somebody from Solarbotics will be at the Eastern Canadian Robot Games, namely Dave Hrynkiw, and Grant McKee. If you're going to be out in the Toronto region this weekend (October 26 and 27), come by and see the games at the Ontario Science Center!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.