Don't even bother reading this introduction - skip on ahead and go to the first link in the list. It'll blow your mind. Medusa -Proximity Aware Multi-Touch Tabletop This interactive surface (which is actually a version of Microsoft Surface) uses a mind-boggling 138 proximity sensors to detect people around and using the table. As far […]
Open Beam Extrusions and Videos
Solar botics
November 23, 2012
We've been having lots of fun with Openbeam, building all kinds of handy contraptions out of it. Today's issue of Hey Look It's New Stuff covers a big chunk of our stock.
|
OpenBeam Extrusion - 1000mm Length $175.00 If you find it annoying to cut the 1m open beam extrusions down to size - you can now rejoice! Open beam precut lengths are here! Offered in a conveniently packaged kit, these precut pieces are ideal for designing all kinds of interesting structures. It is available in both black and silver. |
 |
OpenBeam Precut Extrusion, Clear Anodized, 30mm $1.00 |
 |
OpenBeam Precut Extrusion, Clear Anodized, 45mm $1.00 |
 |
OpenBeam Extrusion, Clear Anodized, 60mm $1.25 |
 |
OpenBeam Extrusion, Clear Anodized, 90mm $1.50 |
 |
OpenBeam Precut Extrusion, Clear Anodized, 120mm $1.80 |
 |
OpenBeam Precut Extrusion, Clear Anodized, 150mm $2.10 |
 |
OpenBeam Precut Extrusion, Clear Anodized, 210mm $2.75 |
 |
OpenBeam Precut Extrusion, Clear Anodized, 270mm $3.30 |
 |
OpenBeam Precut Extrusion, Clear Anodized, 300mm $3.65 |
 |
OpenBeam Extrusion - 1000mm Length $10.00 |
 |
9V Snap to 2.1mm Barrel jack Cable $2.95 Well, this one is not OpenBeam, but we were too excited to have them in finally to leave them 'til the next week. Need a battery for your Arduino that is high enough to regulate the voltage to down to a solid 5V? Well here comes the 9V Snap to 2.1mm Barrel Jack Cable to your rescue! It allows you to plug in 9V and 7.2V rechargeable batteries to anything with a 2.1mm Barrel receptacle on it. |
And what would you make out of all these neat little pieces, you will ask? Our latest is the robot chassis that we showed off a couple days ago. This particular revision shows our attempt at mounting laser-cut wheel-legs ("Whegs"?) and having it scramble across a particularly nasty Lego landscape. If you wanna sneak a peek at yet another iteration of the chassis we are working on, visit our Flickr photostream.
In other news, we use lots of ribbon cable and often need it in precision cuts of 8"-lengths. Using OpenBeam parts, an Arduino with CMDR shield, and a stepper motor we created this super handy machine you can see below. You can find a bit of project details in the video description.
We were also getting really tired of endlessly counting screws. So we got an automatic screwdriver feeder, and bent it into our will by hacking it with Arduino that controls the current and reads the sensor input. We also built a rotating carousel for catching the parts using some handy Openbeam components.
And that's it for the OpenBeam issue today. Huge kudos go out to Terence Tam for kickstarting this cool construction material!
PS- Just a quick reminder that you can order your custom Useless Box top. More details in one of the previous posts.
MORE POSTS
Friday New Product: Ribbon Cable, RGB LE...
We got some sticks for sale today. Some are bendable sticks. You can use them as a belt and if you are near the hydroelectrostation dam you can put the power wire into water and that will pick up some leftover electricity and you get a glowing belt. Now other things are measuring devices. You […]
MakeFashion Tech Gala Photos
Solarbotics just attended the MakeFashion Gala here in Calgary. It was a glowing show of glowing lights and wearable technology. Check out the photos in our Flickr stream. Photo courtesy George Dimitrov Photography Among all the other wonderful things we've seen using our string LEDs before, there was nothing quite as intense as these outfits. […]
Freeduino, Freeduino, Freeduino!
The whole 'duino thing is just so much to say, we've got to do it three times. Blame Jerome, our intern... We've got Freeduino version 2.2 back from the assembly line today, and all tests out beeeautifully! New features include an SMD-mounted 16MHz crystal, better power-consumption circuit routing (for battery-operated projects), and "hacking pads" for […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.