Open Beam Extrusions and Videos

Solar botics
November 23, 2012

We've been having lots of fun with Openbeam, building all kinds of handy contraptions out of it. Today's issue of Hey Look It's New Stuff covers a big chunk of our stock.

OpenBeam Extrusion - 1000mm Length
$175.00
If you find it annoying to cut the 1m open beam extrusions down to size - you can now rejoice! Open beam precut lengths are here! Offered in a conveniently packaged kit, these precut pieces are ideal for designing all kinds of interesting structures. It is available in both black and silver.
OpenBeam Precut Extrusion, Clear Anodized, 30mm
$1.00
OpenBeam Precut Extrusion, Clear Anodized, 45mm
$1.00
OpenBeam Extrusion, Clear Anodized, 60mm
$1.25
OpenBeam Extrusion, Clear Anodized, 90mm
$1.50
OpenBeam Precut Extrusion, Clear Anodized, 120mm
$1.80
OpenBeam Precut Extrusion, Clear Anodized, 150mm
$2.10
OpenBeam Precut Extrusion, Clear Anodized, 210mm
$2.75
OpenBeam Precut Extrusion, Clear Anodized, 270mm
$3.30
OpenBeam Precut Extrusion, Clear Anodized, 300mm
$3.65
OpenBeam Extrusion - 1000mm Length
$10.00
9V Snap to 2.1mm Barrel jack Cable
$2.95
Well, this one is not OpenBeam, but we were too excited to have them in finally to leave them 'til the next week. Need a battery for your Arduino that is high enough to regulate the voltage to down to a solid 5V? Well here comes the 9V Snap to 2.1mm Barrel Jack Cable to your rescue! It allows you to plug in 9V and 7.2V rechargeable batteries to anything with a 2.1mm Barrel receptacle on it.

And what would you make out of all these neat little pieces, you will ask? Our latest is the robot chassis that we showed off a couple days ago. This particular revision shows our attempt at mounting laser-cut wheel-legs ("Whegs"?) and having it scramble across a particularly nasty Lego landscape. If you wanna sneak a peek at yet another iteration of the chassis we are working on, visit our Flickr photostream.

In other news, we use lots of ribbon cable and often need it in precision cuts of 8"-lengths. Using OpenBeam parts, an Arduino with CMDR shield, and a stepper motor we created this super handy machine you can see below. You can find a bit of project details in the video description.

We were also getting really tired of endlessly counting screws. So we got an automatic screwdriver feeder, and bent it into our will by hacking it with Arduino that controls the current and reads the sensor input. We also built a rotating carousel for catching the parts using some handy Openbeam components.

And that's it for the OpenBeam issue today. Huge kudos go out to Terence Tam for kickstarting this cool construction material!

PS- Just a quick reminder that you can order your custom Useless Box top. More details in one of the previous posts.

MORE POSTS

February 19, 2020
And then there was HEAT SHRINK. And Encl...

We're adding more and more from our Active Tech Calgary store lineup to our website. This week, NTE's line of head-shrink tubing, and Hammond Enclosures. This reflects what we have presently on hand in the store, which we're now able to bring to you via the website! We realize that with the new dataload our […]

August 5, 2004
Sumovore PIC Brainboard

Wheee! It's finally outta my hair - the Sumovore PIC Brainboard now available to all you microcontroller fans that insist on programmable robots. Complete with a 5 pin and RJ11-6 port, you can use practically all PIC programming tools and hardware (or build your own programming cable as detailled in the instruction) to put your […]

August 14, 2015
Friday New Product - Grove and RGB LED B...

Grove - 2-Coil Latching Relay $12.84 The Grove latching relays are interesting because they take a pulse to toggle their state, which it maintains even after a power cycle. GrovePi Starter Kit for Raspberry Pi $116.87 Carrying a GrovePi+ board together with 12 carefully selected Grove sensors with 10 pieces cables, this starter kit gets […]

August 14, 2017
New Product Monday

AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart