Friday New Products: Microphone Accessor...

Solar botics
November 14, 2014

New product for your attention:

Electret Microphone Breakout
$7.95
Audio sensors & mics have to be amplified just right for best response. Here's a tidy unit engineered by Sparkfun to make adding an electret mic to your project easy.
MEMS microphone board
$9.95
Newer MEMS microphones give much better response than older style electret mics, and they're smaller too.
2.1mm Jack Power Adapter
$2.95
It's a pain to solder up barrel jacks, so these screw-terminal based versions are very popular for repurposing DC power supplies to other applications!
DC Jack Socket Panel-Mount Connector 5.5x 2.1mm - 2 pin
$2.55
Use this 2 pin panel mount DC jack to add a little polish to your next project.

MORE POSTS

August 26, 2010
Strange set of Atmel '328 ICs...

Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]

July 4, 2017
Metal Spinning Field Trip

We've been researching a manufacturer for a shiny new product we are working on (shhh, don't tell anyone and stay tuned for the reveal!). What we have been looking for is a metal spinner. Metal spinning, also known as spin forming, spinning, or metal turning most commonly, is a metalworking process by which a disc […]

March 4, 2003
BEP Application #4 - The BBPV

We've churned out another Bicore Experimenter's PCB project: The "Bare Bones PhotoVore". This is an elegant little circuit, which offers the functionality of a basic photovore (with tactiles) all on a very simple circuit. Ours is solar-powered by a Miller Solarengine, but if you wanted to build one with a battery, your parts count would […]

May 2, 2014
Solarbotics at MakerFaire Bay Area

We are excited to announce that it is now official - we are going to the MakerFaire Bay Area! Solarbotics will be in the Maker Shed May 17 & 18, 2014 with some brand new product. Come check it out if you are around.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.