We now sell Sintra, a lightweight, easy to work with material that comes in a variety of colors including white, red, blue and yellow. Check the link at: Sintra Sales page Sintra is easy to cut by scoring a line with a knife and then breaking it. Glue also works well bonding pieces of sintra […]
Friday New Product: Ribbon Cable, RGB LE...
Solar botics
November 8, 2013
We got some sticks for sale today. Some are bendable sticks. You can use them as a belt and if you are near the hydroelectrostation dam you can put the power wire into water and that will pick up some leftover electricity and you get a glowing belt. Now other things are measuring devices. You can measure things in non-traditional units.
|
3-pin Ribbon cable connector (WS2812 compatible) $1.25 Secure, locking, high-current 3-conductor connectors ideal for the New Stripxel WS2812b. |
 |
5V RGB LED Stripxels WS2812B (30 per meter) $17.00 There's a new style of RGB Strip LED now, with an embedded controller chip in each LED - the WS2812B! |
 |
5V RGB LED Stripxels WS2812B (72 per meter) $30.00 There's a new style of high density RGB Strip LED now, with an embedded controller chip in each LED - the WS2812B! |
 |
Modified Openbeam Sale - 74.9cm long, 3/16" holes $7.00 What do you do with returned modified Openbeam? Find it a good home! |
My height is is 2.30975 OpenBeam extrusions. Or many 3-pin ribbon cable connectors.
MORE POSTS
3D Printed Treetop Star
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own. After some trial and error (due […]
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
BEP Documentation Correction... part 2!
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.