So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam […]
Friday New Product Post - New Arduino, M...
Solar botics
December 14, 2012
Stupid calendar! I almost wanted to congratulate everyone on surviving Friday the 13th... But the dumb calendar did not cooperate. So I have no choice but to complain. Maybe even submit a report to the calendar. Those stubborn days and their numbers, they will answer for such a misbehavior.
|
Arduino Due $58.95 The long awaited ARM board by Arduino is finally here, now you can access higher level functionality while still using the wildly popular Arduino IDE. |
 |
Motor Mind BE 3A Serial Motor Controller $29.99 Here is a motor controller that only needs 2 lines for control, it communicates serially via 2400 or 9600 Baud TTL signals. It's a smart controller that has a number of parameters that can be adjusted and can return valuable data such as speed & position. |
 |
Arduino Due Faceplate $3.00 The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of development boards + shields. |
In other news, we updated the SB-Firefly code. It now saves your mode setting, so when you remove power from the Firefly, you will start in the same mode once power is re-applied. We also have a new Sixth mode called Rainbow which is designed to smoothly color cycle an RGB LED, such as what we have included with the Northern Lights Bundle... hint... hint. The code is available for download - look for SB-FireFly Code V2 in the SB-FireFly's Documentation tab.
In regards to those pesky calendar issues... I might forgive the number 8, for personal reasons. Others numbers from 1 to 31 are going under house arrest. Until someone bribes me. With cake.
MORE POSTS
Solarbotics looking for fun people
...oh, and they also should want to work with us. We have a few positions open we want to fill with people that have a good sense of humour, have some geek qualities, and can tell the difference between a diode and resistor (or sincerely want to learn!) Here are the types of people we're […]
Aleph Objects (Lulzbot) is still alive! ...
Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
New Product: OPEN BEAM! (..and some othe...
We have a pretty darn big announcement for you today: we're now distributing Open Beam! It's a new handy-dandy construction system that got its start from Kickstarter, and is gaining a lot of immediate support. Right now, we're stocking all the items except for the kits, which we'll probably bring onboard in the near future. […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.