Adafruit FeatherWing Proto - Prototyping Add-on For All Feather Boards $6.95 A Feather board without ambition is a Feather board without FeatherWings! Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0 $27.80 Feather M0 Development Board - Thin, Light, Powerful! Adafruit FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards $20.85 This is the […]
Friday New Product: PCBGrip
Solar botics
August 28, 2015
|
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). |
 |
PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. |
 |
T-Bolt Accessory (pairs) $4.80 Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch! |
 |
PCBGrip M3x0.5 Thumb Screw, 14mm dia. Head (4 pack) $6.30 These are nicely machined M3, 14mm diameter thumbscrew from PCBGrip. |
 |
PCBGRip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack) $15.90 Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip. |
 |
PCBGrip M3x0.5 Knurled Nut (25 pack) $11.82 Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3. |
MORE POSTS
New Product Monday
AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]
Maker Faire, Closed Mon. May 24th
Hey look, we're at Maker Faire! Hey look, we're at the Solarbotics Office! ... Hey look, we're like an amoeba, splitting in half to be in two places at once. Ok, here's the skinny - Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in […]
Shok Circuits
Here's a little something from Grant in the development lab - a very simple pair of circuits based on Mark Tilden's Bicore Shok architecture. This circuit makes for a very simple, effective Photovore robots, or even a photo-head. Take a look - schematics & parts listed included! We've also added a gallery entry for these […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.