If you are in Calgary & area this weekend, come see us at BMO Centre Expo Holiday Market. On November 25 & 26, 2017 we are going to be at booth 1314 with our new and all-time favorite gadgets. The hours of the show are: Saturday 10-6, Sunday 10-5.
Friday New Product: PCBGrip
Solar botics
August 28, 2015
|
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). |
 |
PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. |
 |
T-Bolt Accessory (pairs) $4.80 Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch! |
 |
PCBGrip M3x0.5 Thumb Screw, 14mm dia. Head (4 pack) $6.30 These are nicely machined M3, 14mm diameter thumbscrew from PCBGrip. |
 |
PCBGRip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack) $15.90 Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip. |
 |
PCBGrip M3x0.5 Knurled Nut (25 pack) $11.82 Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3. |
MORE POSTS
Wednesday Cool Links: All Sorts of Odds ...
With the runaway success of the Useless Box, many of us here at Solarbotics can be assembling the kits in our sleep, even under a dose of tranquilizers, and be orchestrating the two lasers at the same time with no difficulty whatsoever. Just like I used to count transistors for the latest in Soviet Death […]
New Servo-liciousness
For far too long we've toiled under the merciless grip of the Gear Motor. But no more! For behold, there appears a trio of defiant servos to overthrow the tyrannical rule! *cough* But seriously forks, we have three new units available from Grand-Wing Servo. The 22140 GWS Modified Servo is a useful continuous rotation, full-sized unit. […]
Cold, hard, steel... mounts!
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.