Yes, it's true. After years of working our fingers to the bone inserting jumper wires on breadboards to make unusually robust controllers for robots out of discrete & logic chip elements, Solarbotics has seen the light! We've put on our eye-patch, hoisted the jolly-roger, and swung along-side to board the HMS HVWTech.com ! That's right […]
Friday New Product: PCBGrip
Solar botics
August 28, 2015
|
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). |
 |
PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. |
 |
T-Bolt Accessory (pairs) $4.80 Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch! |
 |
PCBGrip M3x0.5 Thumb Screw, 14mm dia. Head (4 pack) $6.30 These are nicely machined M3, 14mm diameter thumbscrew from PCBGrip. |
 |
PCBGRip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack) $15.90 Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip. |
 |
PCBGrip M3x0.5 Knurled Nut (25 pack) $11.82 Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3. |
MORE POSTS
Friday New Product: Brackets and Push Bu...
Another Friday has arrived, and with it we have some new mounting hardware and buttons to look at: Pololu Mini Plastic Gearmotor bracket Pair - Wide $3.25 Affix our GM6 and GM7 motors to any project with these plastic motor brackets. Pololu Mini Plastic Gearmotor bracket Pair - Tall $3.25 Affix our GM6 and GM7 […]
We're CLOSED for Maker Faire
Yeah, we warned you. We're not even in our office to write out this newspost. Nay, this is one of them fancy pre-recorded messages. It may or may not self destruct. So, yes, we're closed from May 19th (Thursday) to the 24th (Tuesday). We'll resume filling/shipping orders and replying to any correspondance once we're back […]
Friday New Product: eSun Filament, Push ...
Today we have a rainbow of colorful stuff, which apparently doesn't look anything like it at the moment, but believe me, it is. eSun 1.75mm PLA filament - 1kg Spool $30.00 1.75mm PLA filament for 3D printing. PLA is an excellent general purpose filament with a great finish, very rigid and biodegradable. eSun 1.75mm ABS […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.