Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). |
|
PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. |
|
T-Bolt Accessory (pairs) $4.80 Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch! |
|
PCBGrip M3x0.5 Thumb Screw, 14mm dia. Head (4 pack) $6.30 These are nicely machined M3, 14mm diameter thumbscrew from PCBGrip. |
|
PCBGRip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack) $15.90 Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip. |
|
PCBGrip M3x0.5 Knurled Nut (25 pack) $11.82 Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3. |
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
A couple of weeks back we held an open house for Calgary's Protospace group. Many BBQ'd items were consumed, many objects were lazored, and many people seemed to be walking around in a stupor of admiration for all the nifty bits and pieces of equipment we have on hand. We had a good time visiting […]
We've finally migrated our new site from the internal development platform to the host's development platform! What's that mean to you? After we reconfigure some settings and run a gauntlet of tests, we should be live in days/weeks, not weeks/months! Thank you for your patience. We'll make it worthwhile.
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem. Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving. Alternately, since we first worked on the Golem, we've been […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.