This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]
Friday New Product: Motor Brackets, Mini...
Solar botics
May 3, 2013
And again, after a little bit of a (long) break, we're back with the new exciting things. This time we brought in some tiny motor brackets, a Minishield from Didel and a uM-FPU64 Breakout Board Kit.
|
GM23 Motor Brackets & 18mm Wheels $13.52 The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor. |
 |
GM23 Motor Brackets & 32mm Wheels $14.56 The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor. |
 |
Didel 2 Motor Minishield $17.16 Need a Motor driver that can run at the lower voltages? The Didel 2 Motor Minishield can come to your rescue! Use your Arduino Uno (or form factor compatible) board with it to drive a tiny robot around. |
 |
uM-FPU64 Breakout Board Kit $33.95 The uM-FPU64 28-pin breakout board has all of the required connections, and provides access to all uM-FPU64 pins. It can be used itself for permanently mounting in a project or to compliment another development board. |
Ok, this is gonna be a very short conclusion this time. Hmmmm, what's the good excuse to run off? Oh, the weather is really good! And I promised our lasers a nice long walk! So I gotta take them out, all three, on a leash, see you next ti...
MORE POSTS
PIMP YO' SUMO!
The biggest complaint we've ever had is that the Sumovore is boring. I mean, yeah, it can beat the tar out of most other sumos in the ring without batting an eye. But it's just so boring to watch. It'd be funner to watch the paint dry on a pot of boiling water. So, after […]
WCRG 'Get Building' Sale
The Western Canadian Robot Games are fast approaching, so we're going to help spur on building by reducing the prices of our batteries by half! Get building - you only have less than 2 months to finish!
Cold, hard, steel... mounts!
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.