Friday New Product: Motor Brackets, Mini...

Solar botics
May 3, 2013

And again, after a little bit of a (long) break, we're back with the new exciting things. This time we brought in some tiny motor brackets, a Minishield from Didel and a uM-FPU64 Breakout Board Kit.

GM23 Motor Brackets & 18mm Wheels
$13.52
The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor.
GM23 Motor Brackets & 32mm Wheels
$14.56
The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor.
Didel 2 Motor Minishield
$17.16
Need a Motor driver that can run at the lower voltages? The Didel 2 Motor Minishield can come to your rescue! Use your Arduino Uno (or form factor compatible) board with it to drive a tiny robot around.
uM-FPU64 Breakout Board Kit
$33.95
The uM-FPU64 28-pin breakout board has all of the required connections, and provides access to all uM-FPU64 pins. It can be used itself for permanently mounting in a project or to compliment another development board.

Ok, this is gonna be a very short conclusion this time. Hmmmm, what's the good excuse to run off? Oh, the weather is really good! And I promised our lasers a nice long walk!  So I gotta take them out, all three, on a leash,  see you next ti...

MORE POSTS

October 18, 2013
New Product Friday: GSM Shield, Conducti...

Well today we are presenting things! Here's how they work. GSM shield comes supplied with a sticker that you can draw a little arrow on it, and then you mount the shield on a stick, and it will show the direction of where you have to go. To set the direction whisper your exact latitude […]

November 28, 2012
Wednesday Cool Links

Here we go, it’s the W day again. Seems like the previous one was two infinities ago. During that infinite time we had plenty of opportunities to pick the interesting stuff floating around internets, and bring it to you: Headphone Light Show EL (electroluminescent) wire is a cool thing. Add it to the headphones and […]

May 21, 2008
Solar-powered hopping robots? It's been ...

Actually, it's been done, but not this nicely. Those guys at Ecole Polytechnique Fédérale de Lausanne (EPFL) have a nice report on their "microglider" project. They do some fine work! Bah. That picture is too small! Let's look at a BIG one! Ooo! And they have more big pictures here! This one is nice - […]

July 12, 2007
BEP Application: Servocore Walker

BEP02-Complete-120_2035.jpg
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart