The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Friday New Product: Motor Brackets, Mini...
Solar botics
May 3, 2013
And again, after a little bit of a (long) break, we're back with the new exciting things. This time we brought in some tiny motor brackets, a Minishield from Didel and a uM-FPU64 Breakout Board Kit.
|
GM23 Motor Brackets & 18mm Wheels $13.52 The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor. |
 |
GM23 Motor Brackets & 32mm Wheels $14.56 The microbot revolution has arrived! These brackets and 32mm wheels are much needed accessories to make great use of the tiny GM23 Gear Motor. |
 |
Didel 2 Motor Minishield $17.16 Need a Motor driver that can run at the lower voltages? The Didel 2 Motor Minishield can come to your rescue! Use your Arduino Uno (or form factor compatible) board with it to drive a tiny robot around. |
 |
uM-FPU64 Breakout Board Kit $33.95 The uM-FPU64 28-pin breakout board has all of the required connections, and provides access to all uM-FPU64 pins. It can be used itself for permanently mounting in a project or to compliment another development board. |
Ok, this is gonna be a very short conclusion this time. Hmmmm, what's the good excuse to run off? Oh, the weather is really good! And I promised our lasers a nice long walk! So I gotta take them out, all three, on a leash, see you next ti...
MORE POSTS
Open Beam Extrusions and Videos
We've been having lots of fun with Openbeam, building all kinds of handy contraptions out of it. Today's issue of Hey Look It's New Stuff covers a big chunk of our stock. OpenBeam Extrusion - 1000mm Length $175.00 If you find it annoying to cut the 1m open beam extrusions down to size - you […]
Vancouver BEAM Workshop
Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html
New Years, New PumLantern Art
Well, we've taken a few days off to enjoy some turkey and presents, and we've come back to the office to keep chugging away... But it's time for another break! New Year's is within spitting distance, and we'll be closed for New Years Day (that, of course, would be Friday, January 1st). As always, we'll […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.