It's the summer! Or something somewhat similar... And this is the summer issue of the new links. Not the last one, of course. Mechanical Ball Clock Wood? And marbles? And it's a clock?! This needs to be shown! (Via Dangerous Prototypes) Magnetic Sand Hourglass Don't we all love things to fidget with? This one will […]
Friday New Product: LilyTwinkle, Teensy ...
Solar botics
April 11, 2014
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is.
|
4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! |
 |
LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and shine. You can control up to 4 LED's with ease! |
 |
Adafruit Trinket - Mini Microcontroller - 3.3V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Adafruit Trinket - Mini Microcontroller - 5V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Teensy USB Board, Version 2.0 w/o Header Pins $16.00 This platform is like an Arduino but smaller... Oh and with almost twice the amount of digital I/O and more than double the amount of analog inputs. In short this platform is super cool! |
We also posted some (relatively) new laser videos (one and two), in case you have some lasers to play with.
MORE POSTS
Wednesday Links: Robot Light Painting, M...
Masking tape and storytelling! Calcium pills and Scandinavian gods! Stop signs and distant relatives. None of the above mentioned things are going to be featured in this post, although they are extremely noteworthy. But all the things in the universe are interconnected, so there's still a chance that this stuff will make sense for someone. […]
Helios Turbots
These new Baby "Helios" Turbots by Grant McKee are an experiment to see how much can be done Turbot-wise with a single motor.
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.