After a long hiatus, our PP3 chisel-tip pogo pins are back! And it looks like they're here to stay, so no more drop-outs in supply. I know that we use them for robotics applications, but there's a lot of people using them for other electronics purposes. Now you can get them reliably, and in quantity, […]
Friday New Product: LilyTwinkle, Teensy ...
Solar botics
April 11, 2014
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is.
|
4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! |
 |
LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and shine. You can control up to 4 LED's with ease! |
 |
Adafruit Trinket - Mini Microcontroller - 3.3V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Adafruit Trinket - Mini Microcontroller - 5V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Teensy USB Board, Version 2.0 w/o Header Pins $16.00 This platform is like an Arduino but smaller... Oh and with almost twice the amount of digital I/O and more than double the amount of analog inputs. In short this platform is super cool! |
We also posted some (relatively) new laser videos (one and two), in case you have some lasers to play with.
MORE POSTS
Sumovore Modifications
We're starting to get feedback on Sumovore modifications by our customers. Like, turning the Sumovore into a Room-rover. Or 18V motor operation modifications. Or 'Kaoken' double-voltage adrenaline charges when pushing an opponent. All sorts of stuff! We'll start featuring these modifications shortly, but until then, you may want to take a look at our own […]
More New Gear Motors
Here they come: The GM11a, GM12a, GM13a, GM14a, and the GM18. These motors are very similar to the GM11/12/13/14 series you know and love, but for less money!
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.