3D Printed Violin It sounds beautiful, it looks gorgeous - this is what 3D printing should be! (By 3Dvarius, via Nerdist) 3D Printing Molten Glass Yet another 3d printing example of all things beautiful - the fusion of old (material) and new (technique). (Via Colossal) The Architecture of Radio Yay to the superpower of seeing […]
Friday New Product: LilyTwinkle, Teensy ...
Solar botics
April 11, 2014
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is.
|
4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! |
 |
LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and shine. You can control up to 4 LED's with ease! |
 |
Adafruit Trinket - Mini Microcontroller - 3.3V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Adafruit Trinket - Mini Microcontroller - 5V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Teensy USB Board, Version 2.0 w/o Header Pins $16.00 This platform is like an Arduino but smaller... Oh and with almost twice the amount of digital I/O and more than double the amount of analog inputs. In short this platform is super cool! |
We also posted some (relatively) new laser videos (one and two), in case you have some lasers to play with.
MORE POSTS
Solarbotics at Calgary Entertainment Exp...
Yes! We are quite busy preparing to the above said Entertainment Expo, that is going to take place on April 24-27 2014. Come by our booth(s), which are # 302 and 402, we are going to have lots of new exciting demos to show off. A few preview […]
Freeduino, Freeduino, Freeduino!
The whole 'duino thing is just so much to say, we've got to do it three times. Blame Jerome, our intern... We've got Freeduino version 2.2 back from the assembly line today, and all tests out beeeautifully! New features include an SMD-mounted 16MHz crystal, better power-consumption circuit routing (for battery-operated projects), and "hacking pads" for […]
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.