Hello everyone, today I'll be your guest Russian host. Here's your new product, look at it and leave me alone! I'm busy eating vodka and drinking borscht. In the dacha. After the banya. (Is that good enough for Russian stereotypes?) Right about now the most observant of you might notice that something is wrong with […]
Friday New Product: LilyTwinkle, Teensy ...
Solar botics
April 11, 2014
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is.
|
4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! |
 |
LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and shine. You can control up to 4 LED's with ease! |
 |
Adafruit Trinket - Mini Microcontroller - 3.3V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Adafruit Trinket - Mini Microcontroller - 5V Logic $7.95 Need an Arduino compatible board that's smaller than small? Look no further because the Trinket has got you covered. |
 |
Teensy USB Board, Version 2.0 w/o Header Pins $16.00 This platform is like an Arduino but smaller... Oh and with almost twice the amount of digital I/O and more than double the amount of analog inputs. In short this platform is super cool! |
We also posted some (relatively) new laser videos (one and two), in case you have some lasers to play with.
MORE POSTS
New Products: All-Seeing Eye, LCDs
A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out: We briefly toyed with the idea […]
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.