The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Friday New Product: LEDs, Battery Holder...
Solar botics
June 20, 2014
Product that is back in stock - is this considered old or new news? I say it's good, because it's a BrutusBot that has regained its chassis and the rest, came back from vacation and ready to take over the world again:And we got some new stuff as well:
 |
Evil Mad Candle Flicker LED Assortment $7.95 15 ultrabright red, yellow and white LEDs with built-in flickering circuits and assorted lens sizes from 3mm and 10mm. |
 |
2 x CR2032 - Coin Cell Battery Holder $1.95 2x CR2032 battery holder with 12" of wire. |
 |
3 x AAA Battery Holder with Cover and Switch $1.95 Give your project a sleek look with this 3 x AAA battery pack with a built in on-off switch and stylish lid. |
And, before I conclude, a little preview of awesome tiny LED Embers that are coming up soon:
MORE POSTS
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Interesting stuff at the Exploratorium
Not exactly relevant to BEAM, but an interesting distraction: Here's some interesting media from the San Francisco Exploratorium. Notable media to watch is their "Iron Science Teacher" competition (familiar with "The Iron Chef? Same idea...), and their hosting of Robot Sumo Wrestling.
Starry Night Pendant Assembly Guide
We've already blogged about the Technology Grad Dresses, which are accompanied by the Starry Night Pendant as a perfect finishing touch to complete the outfit. Since then, we've upgraded and improved the Pendant design to make it a fully documented kit, rather than just a bundle: The 2xAAA battery holder offers longer life, less cost […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.