We had an unexpected delay in San Francisco - so we are not shipping any orders on Tuesday, May 7th. But we are set for tomorrow so normal shipping will resume on Wednesday May 8th, our apologies for any inconvenience this may have caused.
Friday New Product: BusBoard ProtoBoards
Solar botics
July 19, 2013
We've been working hard to bring you a conundrum* of new protoboards and other handy items to go with them (*conundrum - a collective noun used to describe massive amounts of protoboards inhabiting our shelves). This issue of Friday new products features roughly half of the whole selection we offer, which can cover pretty much any projects you decide to do. Can cover, you guessed it, with boards:
|
SB830 Solderable PC BreadBoard (single-panel compatible) $6.50 BusBoard makes lots of great prototyping PCBs. Here's a convenient one that matches a regular 1-panel PC breadboard, with handy top-print overlay, and thinner interconnections for friendly track cutting. |
 |
SB1660 Solderable PC BreadBoard, Double-sized $12.00 BusBoard makes lots of great prototyping PCBs. Here's a convenient one that matches a double-wide PC breadboard. |
 |
BR1 Solderable PC BreadBoard (single-panel compatible) $6.50 BusBoard makes lots of great prototyping PCBs. Here's a convenient one that matches a regular 1-panel PC breadboard. |
 |
BB-2 Zig-zag solder prototyping board, 80x100mm $5.66 Zig-zag patterns on this single-sided prototyping board makes it particularly convenient to solder your circuit down into something permanent. |
 |
PadBoard-3U Protoboard, Pad-per-Hole, 160x100mm $5.66 For the ultimate in protoboard flexibility, here's a one-pad-per-hole, plated-through, double-sided board from BPS. |
 |
PowerBoard-3U, 6-hole strip Solder protoboard $10.78 This traditional soldering protoboard is very similar to a solderless breadboard, but has a monster set of power distribution rails running through it. It also accommodates a 96-pin VME backplane connector for slotting connectivity. |
 |
ProtoBoard2H-2, 2-hole Strips, 100x80mm solder Protoboard $5.66 Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads. |
 |
ST2 StripBoard solder protoboard $5.66 It doesn't get more standard than a large, traditional stripboard for soldering your experiments! |
 |
SMTpads-Size3U-Thin 50x50mil Pads Protoboard for SMT $12.99 SMD parts are becoming easier to find than old "finger-friendly" ones. Have some of these SMT pad-compatible breakout boards for your next tiny project. |
 |
SMTpads-Size3U, 200x100mil Pads Protoboard for SMT $12.99 SMD parts are becoming easier to find than old "finger-friendly" ones. Have some of these SMT pad-compatible breakout boards for your next tiny project. |
 |
ProtoBox-1593K-BK Protoboard and Case Kit $7.23 Got the circuit breadboarded, tested, and ready for field-testing. Ummm... sure would be nice to build that onto a nice protoboard and case shell wouldn't it? |
 |
PCB Mounting Adhesive Standoffs 8-Pack $2.75 If you need to tuck a circuit board someplace and you can't fit a screw, use these handy low-profile, self-adhesive PCB standoffs |
Well, if you were trying to make a telescopic toothpick-shooting badger model, our protoboards might not prove helpful, but even then! Give it a try, you never know...
MORE POSTS
Solarbotics looking for fun people
...oh, and they also should want to work with us. We have a few positions open we want to fill with people that have a good sense of humour, have some geek qualities, and can tell the difference between a diode and resistor (or sincerely want to learn!) Here are the types of people we're […]
BEP Documentation Correction... part 2!
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
New Treads...nummy!
We've got an inventory in of treads, cogs, and idlers that mate up with our GM2/3/8/9 gear motors! You wanna build a photovore or Herbie with attitude? Get at it! You may want to pay special attention to the GMTPkg tread deal. It includes a pair of GM2/3/8/0 style gear motors, so you're ready to […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.