Friday New Product: BusBoard ProtoBoards

Solar botics
July 19, 2013

We've been working hard to bring you a conundrum* of new protoboards and other handy items to go with them (*conundrum - a collective noun used to describe massive amounts of protoboards inhabiting our shelves). This issue of Friday new products features roughly half of the whole selection we offer, which can cover pretty much any projects you decide to do. Can cover, you guessed it, with boards:

SB830 Solderable PC BreadBoard (single-panel compatible)
$6.50
BusBoard makes lots of great prototyping PCBs. Here's a convenient one that matches a regular 1-panel PC breadboard, with handy top-print overlay, and thinner interconnections for friendly track cutting.
SB1660 Solderable PC BreadBoard, Double-sized
$12.00
BusBoard makes lots of great prototyping PCBs. Here's a convenient one that matches a double-wide PC breadboard.
BR1 Solderable PC BreadBoard (single-panel compatible)
$6.50
BusBoard makes lots of great prototyping PCBs. Here's a convenient one that matches a regular 1-panel PC breadboard.
BB-2 Zig-zag solder prototyping board, 80x100mm
$5.66
Zig-zag patterns on this single-sided prototyping board makes it particularly convenient to solder your circuit down into something permanent.
PadBoard-3U Protoboard, Pad-per-Hole, 160x100mm
$5.66
For the ultimate in protoboard flexibility, here's a one-pad-per-hole, plated-through, double-sided board from BPS.
PowerBoard-3U, 6-hole strip Solder protoboard
$10.78
This traditional soldering protoboard is very similar to a solderless breadboard, but has a monster set of power distribution rails running through it. It also accommodates a 96-pin VME backplane connector for slotting connectivity.
ProtoBoard2H-2, 2-hole Strips, 100x80mm solder Protoboard
$5.66
Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.
ST2 StripBoard solder protoboard
$5.66
It doesn't get more standard than a large, traditional stripboard for soldering your experiments!
SMTpads-Size3U-Thin 50x50mil Pads Protoboard for SMT
$12.99
SMD parts are becoming easier to find than old "finger-friendly" ones. Have some of these SMT pad-compatible breakout boards for your next tiny project.
SMTpads-Size3U, 200x100mil Pads Protoboard for SMT
$12.99
SMD parts are becoming easier to find than old "finger-friendly" ones. Have some of these SMT pad-compatible breakout boards for your next tiny project.
ProtoBox-1593K-BK Protoboard and Case Kit
$7.23
Got the circuit breadboarded, tested, and ready for field-testing. Ummm... sure would be nice to build that onto a nice protoboard and case shell wouldn't it?
PCB Mounting Adhesive Standoffs 8-Pack
$2.75
If you need to tuck a circuit board someplace and you can't fit a screw, use these handy low-profile, self-adhesive PCB standoffs

Well, if you were trying to make a telescopic toothpick-shooting badger model, our protoboards might not prove helpful, but even then! Give it a try, you never know...

MORE POSTS

May 6, 2007
RW2i - Internal mount, and new shaft hol...

We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw […]

August 11, 2012
New Products: LED Strips, LED Controller...

Hello everyone, today I'll be your guest Russian host. Here's your new product, look at it and leave me alone! I'm busy eating vodka and drinking borscht. In the dacha. After the banya. (Is that good enough for Russian stereotypes?) Right about now the most observant of you might notice that something is wrong with […]

October 4, 2001
Push Pogo Pins Update

We've received word that we will be receiving new stock on all our push pogo pins, but they will not be available for order until October 8 or 9th. The order link will be restored when the inventory arrives.

July 8, 2011
Arduino & LoL Shield Pong, New Prod...

Have we all had our fill of Maple syrup and/or fireworks? With Canada Day and Independence Day behind us, we can get on with our regularly scheduled "look at all the new stuff we've brought in" programming. Truth be told, today is actually the start of the Calgary Stampede. Apparently, that's a pretty big deal […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart